It's a good splitter and 2 good pieces of coax, so you are getting almost $10 of stuff if you bought it yourself (I'm sure it only costs Comcast a few dollars since they buy millions of them). I'm pretty sure the OP meant a physical kit: 'do I still need to pick up a self-install kit?' When I tried to 'skip' the $10 self install kit last year they refused, claimed they had to send out the box with the splitter and coax in order to get the order into the system.
Said by flwpwr: if by kit you mean the box with the splitter and 2 cables in it you can skip it as long as you have a cable, if by kit you mean the charge they give you for registering your modem, yeah it is necessary. In that case, you will probably need to physically go to the local Comcast office to provide positive identification to prove that you are not the previous tenant. One problem you might run into is if the previous tenant in your apartment left a bill balance with Comcast, or did not return Comcast owned equipment.
#PICKUP SELF INSTALL KIT XFINITY PASSWORD#
However, if you find that the network’s user name or password is difficult to remember, you can change the SSID and password by logging into your router.The only current restriction on using the walled garden page seems to be that you have to use it with a directly connected PC instead of going through a NAT router (but that may be router dependent). IPhones may be able to share the Wi-Fi password from one device to another. Enter the password when prompted and you should be connected. Find the name of the device (SSID) and select the network. You’ll find the network name and password on a label at the bottom or the back of the device. Once you’ve set up your equipment, you can connect your devices to the home network. Be sure the router you choose is backed by good customer service that’s available to walk you through an installation.Ĭonnect your devices to your wireless network The ISP will not provide troubleshooting or customer support for a device you already own or purchased elsewhere. Please include your first and last name and address. Can you send me a private message To send a private message, click on my name, 'ComcastChe,' and then click send a message. There aren’t any Xfinity router setup instructions available for third-party devices. I'm sorry you haven't received the self-install kitt. If you’re using your own router to provide wireless internet in your home, you’ll need to refer to the router’s instructions to set it up. Xfinity router setup and connection to modem If you’re using a third-party modem, you may need a router if you want to connect wirelessly. The Xfinity modem is integrated with a router to deliver a Wi-Fi signal throughout your home from one piece of equipment. Connect the coax cable and power source, and let the modem cycle until the lights are solid. Installation is similar to using an Xfinity modem. Xfinity provides a list of approved modems based on service in your area. rental fee, as long as the third-party modem is one of the approved and compatible versions. It’s ready when the light is solid for 60 seconds.Īre you wondering if you have to rent a modem from Xfinity? You could use your own modem and skip the $14/mo. Power the modem and let it cycle for 20 minutes.
0 kommentar(er)
